The new G-VECTOR MICRO is the worlds smallest vector system !
This revolutionary G-VECTOR-MICRO system for very small sport jets allows you to fly breath taking manoeuvres like the big vectored jets do !
Following the design of our large G-VECTOR, the micro version is a PLUG ON SYSTEM, that slips over the existing jet pipe (our "INTERMEDIATE"-jet pipes in the category 30-60 N ). The big advantage is the free floating principle, that does not change the neutral trim, when the pipe expands under heat.
The G-VECTOR MICRO is designed around our "INTERMEDIATE"- jet pipe, so you can order a complete system, or slip the vector over your Grumania pipe that you ordered earlier.
We deliver the G-VECTOR MINI with aluminium ball links - MADE IN GERMANY - and all needed screws and nuts to assemble and fix the unit in the model, but not with the carbon rods to link the vector system to your servo ( ideally carbon tubes, 4 mm inside and 6 mm outside diametre - or carbon rods with 3 mm diametre ) The vector unit is premounted, except the mounting brackets.
Technical data:
- Thrust class 30- 60 N
- Length over all 65 mm, overhang behind outer shroud of vector unit 25 mm
- Order length for pipe should be around 16 mm shorter than a pipe that is used without a vector
- Required opening in supporting former 65 mm
- maximum allowed jet pipe diametre 64 mm
- Weight 54 grams
The supporting former in the tail should have 25,5 or 14 mm distance to the back end of the fuselage ( depending on the assembly of the mounting latches ) , this distance can also be adjusted by using wooden spacers between the mounting latches and the former
*Aternatively, the turbine can be moved forward
