The new G-VECTOR MINI is the worlds first and only small vector system !

This revolutionary mini vector system for small sport jets (like the mini Avanti) allows you to fly breath taking manoeuvres like the big vectored jets do !
Following the design of our large G-VECTOR, the mini version is a PLUG ON SYSTEM, that slips over the existing jet pipe (our jet pipes in the category 40-80 N, outside diametre 72 mm).The big advantage is the free floating principle, that does not change the neutral trim, when the pipe expands under heat !

The G-VECTOR MINI is designed around our JP40 jet pipe size, so you can order a complete system, or slip the vector over your Grumania pipe that you already have.

We deliver the G-VECTOR MINI with aluminium ball links - MADE IN GERMANY - and all needed screws and nuts to assemble and fix the unit in the model, but not with the carbon rods to link the vector system to your servo ( ideally carbon tubes, 4 mm inside and 6 mm outside diametre - or carbon rods with 3 mm diametre ) The vector unit is premounted, except the mounting brackets.

Technical data:

- Thrust class 40- 80 N

- Length over all 64 mm, overhang behind jet pipe 35,5 mm

- Required opening in supporting former 74 mm

- maximum allowed jet pipe diametre 72 mm

- Weight 57 grams*

The supporting former in the tail should have 21 mm distance to the back end of the fuselage, this distance can also be achieved by using spacers between the mounting latches and the former

* excluding linkage